Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Sample Set on Copper – 25gms of each enamel in this range (WPCDSET)

£40.95

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – White 12541

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Clear Flux 12542

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Copper Groundcoat 12543

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Ivory 12544

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Black 12545

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Yellow 12546

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Sky Blue 12547

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Celadon Green 12548

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Deep Yellow 12549

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Grey 12550

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Light Brown 12551

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Chestnut Brown 12552

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Jade 12553

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Dark Green 12554

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Royal Blue 12555

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Purple 12556

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Orange 12557

£3.14 – £22.71

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamel (Powder) – Red 12558

£3.14 – £22.71

Wet Process Enamels on Copper in Dry Form

Wet process enamels have proved over the last few years to be very popular, opening up a whole new range of effects. However, delivery costs can sometimes be prohibitive. The availability of the enamels in dry form overcomes this problem, just requiring the addition of water. To achieve our recommended thickness of enamel, put 8 parts by weight of wet process dry powder into a suitable sized container then add 3 parts by weight of water and stir until smooth, it is then ready to use. If you prefer, you can vary the powder to water ratio to suit your requirements. The photographs show the enamels applied direct to degreased copper by spraying. If spraying is used, efficient extraction must be used to remove spray vapour from the work area. The enamels can also be applied either by dipping or with a soft brush. Each photograph shows one and two coats of enamel.The gauge of the copper is 0.9. The actual size of each tile is 6cm x 10cm. Firing time was 3 minutes at 800 centigrade. The copper groundcoat can be used to give an off-white base on which to apply wet process colours. Higher and longer firing of wet process enamels on copper gives very interesting results as the tile colours become tinted with chemicals in the copper base.

Wet Process Leadfree Enamels on Copper Supplied in Dry Form

Wet Process Enamels on Copper in Dry Form

Login