Enamelling Starter Kit 4 with Kiln (EK4)

Enamelling Starter kit 4 (EK4)

This kit contains everything needed to introduce you to the fascinating and rewarding craft of enamelling.

The kit contains:-

A Prometheus PRO-1 mini kiln with digital controller, see below technical specification.

Volts – 230V

Amps – 3A

Watt – 700W

Controller – Digital temperature controller

Max Temperature – 1000c

External size – 225 x 240 x 270 (mm)

Firing Chamber – 115 x 125 x 70 (mm)

Net weight – 5.7 KG

25gm each of 5 x Transparent and 5 x Opaque enamels for application to copper, gold and silver.

25gm of multi-coloured crushed enamel lumps to give small areas of contrasting colours when placed on a base coat of enamels.

A tube of enamel threads, mixed coloured strands of enamel to give straight lines when placed on a base coat of enamel.

A selection of copper blanks and brooch pins. Pins are attached by gluing after all enamelling processes.

Two shaker tubes to apply the powdered enamel. When changing colour, make sure the mesh is clean from the previous colour.

A stainless steel stilt to support the blanks on whilst firing.

Always place the piece to be fired on the stilt outside the kiln and then lift into the kiln.

An angled spatula for lifting pieces on and off the stilt.

A firing fork for lifting pieces in and out of the kiln.

An entry level dust mask and safety glasses.